Ganesh Steel Corporation

These steel strips are popularly known as hardened tempered spring steel strips, spring steel strips, hardened steel strips, blue tempered strips, spring strips.

C80 Hardened Tempered Spring Steel Strips is high carbon steel strips with Martensite grain structure with high tensile strength, Produced by passing strips through long continuous heating furnace and oil quenching. Parts made from these strips have uniformity in hardness, flatness and shape as compared to parts made from annealed strips and then hardened in batches.

These strips are usually available in C80 grade per the standard sizes available in stock but also can be provided in C75 & C98 grades if quantities required are viable to produce. These strips are supplied with various options as per requirement of the customer. Edges Slit, rounded or dressed. Surface finish Bright polished, grey (un polished), polished and blued or golden.

Additional Information:

• Production Capacity: 10 tons
• Delivery Time: 1-2 Days
• Packaging Details: High-end export packing for sea or road travel/ completely safe during transit. Duly oiled with anti-rust oil/ wrapped in hessian cloth & high-density plastic sheets to prevent moisture. Further strapped with high tensile strips. For identification & tracing/ non-erasable polyester stickers are placed on each material

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. H & T has excellent spring properties, uniform hardness and texture, H & T has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35
Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

 

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses.  excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 10 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses.  excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belt

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses.  excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

Hardened Tempered Spring Steel Strip highly engineered steel made from hot rolled steel coils.

The cold Rolling process changes the mechanical properties of steel allowing it to meet forming and bending operations as well as to get a good surface finish.

Cold Rolled strip is produced by further processing hot rolled steel strip.

Hot rolled steel strip is descaled with a combination of chemical and mechanical process and then washed to remove acids.

The strip is then further passed through cold rolling mill, this process is called cold rolling because steel is kept below its recrystallization temperature.

Strip is rolled to final thickness either directly or with inclusion of annealing process at some intermediate thickness to enable further rolling.

Due to this process one can achieve better thickness tolerance, good surface finish and desired mechanical properties

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS
Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.
Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.
Chemical composition & Sizes
SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm
Thickness: 0.40-3.00mm
C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35
Low Alloy steels against specific enquiry
Non-standard sizes against specific enquiry
Special features:
Minimum decarburisation
Uniform Hardness and Texture
High degree of toughness
Excellent Spring Properties
Precision blanking ability
Minimum edge camber
Flatness across width
No curling
Supply Condition:
Hardened and Tempered
Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.
Standard Hardness:
ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv
Non-standard hardness may be supplied against specific enquiry.
Typical Application and uses:
Saws
Wood cutting Band saws
Hand saws
Cross-cut saws
Pit saw
Hand Tools
Paint Scrappers
Plastering Trowels
Industrial Knives
Leather
Plastic
Textile
Sugar Cane
Automobile Products
Clutch plates
Brake components
Horn diaphragms
Spring & Spring Washers
Textile and Jute mill accessories
Compressor valve plates
Forge Hammer Belt

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 10 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

We offer Hardened And Tempered Steel Strips, Cold Rolled Medium and High Carbon Steel Strips and Hardened And Tempered Carbon Steel from India

Additional Information:

• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS

Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.

Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes

SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

Thickness: 0.40-3.00mm

C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35

Low Alloy steels against specific enquiry

Non-standard sizes against specific enquiry

Special features:

Minimum decarburisation

Uniform Hardness and Texture

High degree of toughness

Excellent Spring Properties

Precision blanking ability

Minimum edge camber

Flatness across width

No curling

Supply Condition:

Hardened and Tempered

Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:

ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv

Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:

Saws

Wood cutting Band saws

Hand saws

Cross-cut saws

Pit saws

Hand Tools

Paint Scrappers

Plastering Trowels

Industrial Knives

Leather

Plastic

Textile

Sugar Cane

Automobile Products

Clutch plates

Brake components

Horn diaphragms

Spring & Spring Washers

Textile and Jute mill accessories

Compressor valve plates

Forge Hammer Belts

Additional Information:

• Production Capacity: 10 Tons
• Delivery Time: 1-2 DAYS

HARDENED & TEMPERED STEEL STRIPS
Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.
Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.

Chemical composition & Sizes
SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm
Thickness: 0.40-3.00mm
C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35
Low Alloy steels against specific enquiry
Non-standard sizes against specific enquiry

Special features:
Minimum decarburisation
Uniform Hardness and Texture
High degree of toughness
Excellent Spring Properties
Precision blanking ability
Minimum edge camber
Flatness across width
No curling

Supply Condition:
Hardened and Tempered
Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.

Standard Hardness:
ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv
Non-standard hardness may be supplied against specific enquiry.

Typical Application and uses:
Saws
Wood cutting Band saws
Hand saws
Cross-cut saws
Pit saws
Hand Tools
Paint Scrappers
Plastering Trowels
Industrial Knives
Leather
Plastic
Textile
Sugar Cane
Automobile Products
Clutch plates
Brake components
Horn diaphragms
Spring & Spring Washers
Textile and Jute mill accessories
Compressor valve plates
Forge Hammer Belt

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

HARDENED & TEMPERED STEEL STRIPS
Hardened & Tempered Medium & High Carbon Steel Strips, finds wide applications in special industrial uses. excellent spring properties, uniform hardness and texture,Hardened & Tempered Steel has precision blanking ability and rationalizes further processing by eliminating post heat treatment & distortion and thereby increases productivity.
Hardened & Tempered Steel Strips, conforming to National and International Standards viz, IS: 2507, DIN 17222. BS: 1449, ASTM A-682 Medium & High Carbon and Low Alloy steel strips, cold rolled in-house, are heat-treated in continuous line to develop high hardness, toughness, tensile and spring properties.
Chemical composition & Sizes
SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size rangeMedium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm
Thickness: 0.40-3.00mm
C620.60-0.670.60-0.900.0350.0250.35C800.75-0.850.60-0.900.0350.0250.35
Low Alloy steels against specific enquiry
Non-standard sizes against specific enquiry
Special features:
Minimum decarburisation
Uniform Hardness and Texture
High degree of toughness
Excellent Spring Properties
Precision blanking ability
Minimum edge camber
Flatness across width
No curling
Supply Condition:
Hardened and Tempered
Surface: Furnace Blue-Grey or Bright Ground FinishEdges: Available in rounded edgesTolerance: On Width & Thickness as per BIS/International Standards.
Standard Hardness:
ThicknessHardnessUpto 0.40mm525 - 600 HvAbove 0.40 mm upto 0.80 mm475 - 550 HvAbove 0.80mm425 - 500 Hv
Non-standard hardness may be supplied against specific enquiry.
Typical Application and uses:
Saws
Wood cutting Band saws
Hand saws
Cross-cut saws
Pit saws
Hand Tools
Paint Scrappers
Plastering Trowels
Industrial Knives
Leather
Plastic
Textile
Sugar Cane
Automobile Products
Clutch plates
Brake components
Horn diaphragms
Spring & Spring Washers
Textile and Jute mill accessories
Compressor valve plates
Forge Hammer Belts

Additional Information:

• Production Capacity: 5 tons
• Delivery Time: 1-2 Days

We are engaged in offering Hardening and Tempering Spring Steelthat are available in diverse width, finish & different hardness ranging from 30 to 56 HRC. These strips can be sheared with low burrs as per customer’s width requirements. Besides, these are available in grey, bright polished and blue polished surface finish.

Additional Information:

• Delivery Time: 1-2DAYS

Additional Information:

• Item Code: 23
• Production Capacity: 20000
• Delivery Time: 1-2DAYS

Additional Information:

• Item Code: 24
• Production Capacity: 20000
• Delivery Time: 1-2DAYS