Masjid Bunder east, Mumbai, Maharashtra
GST No. 27AJZPK0564D1ZY
Call 08047643628 95% Response Rate
Minimum Order Quantity: 50 Kg
Product Brochure
Material Grade | EN 47 spring steel / 50crv4 |
Type | SPRING STEEL |
Thickness | 0.50 MM TO 12 MM |
Size | 1250MM X 2500MM |
Usage/Application | AUTOMOBILE INDUSTRY |
Weight | AS REQUIRED |
Color | AS REQUIRED |
Finishing | HR & CR |
Hardness | 25-28 HRC |
Tensile Strength | AS REQUIRED |
Carbon Contain | 0.516 |
Manganese | 0.898 |
Phosphorus | 0.011 |
Silicon | 0.270 |
Sulphur | 0.008 |
EN 47/50CRV4 Spring Steel Sheet
5mm Thickness X 1190MM X 2500 MM H R sheet
6mm Thickness X 1250 MM X 2500 MM H R Annealed
8mm Thickness X 1250 MM X 2500 MM H R Annealed
12mm Thickness X 1250 MM X 2500 MM H R Annealed
Additional Information:
View Complete details
Minimum Order Quantity: 10 Kilogram
Thickness | 0.1mm to 8mm |
Usage/Application | Automobile Industry, Automobile Industry |
Brand | TATA, JSW, EVONITH STEEL |
Material | Carbon Steel |
Available Grades in carbon steel Strips
C-45 carbon steel Strips
En 8 carbon steel Strips
En9 carbon steel Strips
C-65 carbon steel Strips
C-80 carbon steel Strips
C-55 carbon steel Strips
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | ALLOY STEEL PLATE |
Thickness | 1 mm to 8 mm |
Shape | Rectangular |
Surface Finishing | BRIGHT, BLACK |
Length | 2500 MM |
Sizes | As required |
Weight | As required |
Finishing | HR And CR Finishing |
Edge | AS REQUIRED |
Carbon Contain | 0.35-0.45 |
Manganese | 0.50-0.80 |
Product Description
AISI SAE
UNS No.
C
Mn (max)
P (max)
S (max)
Si
Cr
Mo
Hardness
Tensile Strength
Yield Strength
4140 Steel Plate
Flat Steel Bar
EN 19 PLATES
G41400
0.38 - 0.43
0.75 - 1.0
0.035
0.04
0.15 - 0.30
0.8 - 1.1
0.15 - .25
Bhn 195+
RC 22+
As Rolled Condition
As Rolled Condition
C45
C45E
0.42-0.50
0.40
0.50-0.80
0.030
0.035
0.40
0.10
Bhn 195+
RC 22+
As Rolled Condition
As Rolled Condition
4140 PH or 4140 PREHARD has the same industry standard chemistry as above. 4140 Steel Bar 4140 HR Plate
Oil Quenched & Tempered 4140 PH has a standard, industry recognized Rockwell C Hardness rating of 28 - 32.
Most sources recognize and tend to prefer quoting and requesting the Rockwell C Scale. 4140PH ranges from Brinell Hardness 270 - 300.
Thick 4140 AN (in the Annealed condition) is flame cut, then Annealed onsite in our furnace. Annealing greatly improves Grinding and Machining. Parts can be returned to the standard hardness when followed by a Normalize & Specific Tempering heat treatment process.
Send Online Enquiry
Typical Applications:
Tooling, machine plates, gears, shafts, sprockets, Special Machine Parts
Molds, Metal Stamping, Tool & Die, Shredders
Automotive, Oil & Gas Industries, Machine Shop, Paper Mills
En Series/ Tool Steel Plates Company , En Series/ Tool Steel Plates Wholesaler, En Series/ Tool Steel Plates Wholesale, En Series/ Tool Steel Plates Suppliers, En Series/ Tool Steel Plates Manufacture, En Series/ Tool Steel Plates Distributors, En Series/ Tool Steel Plates saler, En Series/ Tool Steel Plates Stockist, En Series/ Tool Steel Plates Bulk Distributors, En Series/ Tool Steel Plates supplies, En Series/ Tool Steel Plates exporter
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | 0.5 MM TO 8 MM |
Material Grade | SPRING STEEL |
Usage/Application | Industrial |
Color | AS YOU REQUIRED |
Finishing | HR & CR |
Features | ANNELED & HARDENED TEMPERED |
Outside Diameter | AS YOU REQUIRED |
Weight | AS YOU REQUIRED |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | 0.50 MM TO 8 MM |
Usage/Application | Automobile Industry |
Material Grade | EN-42 J / C-80 |
Shape | COIL |
Hardness | 185-220 HV |
Tensile Strength | 590-640 N/MM SQ. |
Yield Strength | 270-290 N/MM SQ. |
Finishing | H.R. AND C.R. |
EN-42 J SPRING STEEL / C-80 STEELTHICKWIDTHLENGTH0.38 MM314 MMCOIL C.R.0.50 MM300 MMCOIL C.R.0.60 MM300 MMCOIL C.R.0.68 MM255 MMCOIL C.R.0.80 MM300 MMCOIL C.R.1 MM300 MMCOIL C.R.1.20 MM300 MMCOIL C.R.1.20 MM38 MMCOIL C.R.1.30 MM56 MMCOIL C.R.1.50 MM300 MMCOIL C.R.1.60 MM270 MM1250 MM C.R.2 MM300 MMCOIL C.R.2.30 MM194 MM2500 MM2.35 mm147 MM2500 MM2.70 MM360 MMCOIL3 MM300 MMCOIL C.R.3.20 MM1250 MM2500 MM H.R.3.50 MM950 MM2500 MM H.R.4 MM330 MM1500 MM C.R.4 MM1250 MM2500 MM H.R.4.50 MM1050 MM3000 MM H.R.5 MM1250 MM2500 MM H.R.6 MM1250 MM3000 MM H.R.
Additional Information:
View Complete details
Minimum Order Quantity: 20 Kg
Thickness | 1 MM TO 8 MM |
Material Grade | EN - 19 |
Material | STEEL |
Usage/Application | Industrial |
Color | SILVER |
Finishing | HR |
Weight | AS REQUIRED |
En 19 ( sae 4140 / 40cr4mo3)
2mm thickness x 600 mm width x coil - crca cold rolled -- 6mt 5mm thickness x 1250mm width x 2500 mm - h. R. Sheet6mm thickness x 1250mm width x 2500 mm - h. R. Sheet__________________________________________________
chemical composition
c % - 0. 32 to 0. 45mn % - 0. 50 to 0. 80si % - 0. 10 to 0. 35cr % - 0. 90 to 1. 20mo % - 0. 20 to 0. 35
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | 0.50 mm to 25 mm |
Material Grade | C-80 SPRING STEEL SHEET |
Material | SPRING STEEL |
Usage/Application | Industrial |
Finishing | BRIGHT |
Density | 7.872 X 10^3 |
Elongation | 10 % |
Tensile Strength | 696 Mpa |
Yield Strength | 540 Mpa |
Hardness | 98 RB |
Spring Steel Strips
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Spring Steel Strips Grades : C-45, C-55, C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.
Spring Steel Strips
EuronormGermanyUKUSAEN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S %PC50ECK 50CS50SAE 1050.45-.55.50-.90.05-.35.040 max.045 maxC67SCK67/C67CS70SAE 1070.68- .73.60- .85.15- .25.01 max.02 maxC75SCK75/C75CS70SAE 1074.70- .75.60- .80.15- .30.025 max.025 maxC85SCK85CS80SAE 1085.80- .90.40- .70.15- .35.025 max.025 max
We offer spring steel strip in various shapes and sizes according to your final uses.
Thickness : 1 mm - 8.0mm
Width : 6 mm - 450 mm
Temper : Spherodized annealed
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries.,for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
Steel Tempered spring steel sheets is a high carbon cold-rolled steel sheet having both excellent stretch-flage form ability and excellent homogeneity of hardness in the sheet thickness direction is provided by a manufacturing method having the transformation point.
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | 0.50 MM TO 8 MM |
Material Grade | C-80 SPRING STEEL |
Material | SPRING STEEL |
Usage/Application | Industrial |
Finishing | BRIGHT |
Spring Steel Strips
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Spring Steel Strips Grades : C-45, C-55, C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.
Spring Steel Strips
EuronormGermanyUKUSAEN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S %PC50ECK 50CS50SAE 1050.45-.55.50-.90.05-.35.040 max.045 maxC67SCK67/C67CS70SAE 1070.68- .73.60- .85.15- .25.01 max.02 maxC75SCK75/C75CS70SAE 1074.70- .75.60- .80.15- .30.025 max.025 maxC85SCK85CS80SAE 1085.80- .90.40- .70.15- .35.025 max.025 max
We offer spring steel strip in various shapes and sizes according to your final uses.
Thickness : 1 mm - 8.0mm
Width : 6 mm - 450 mm
Temper : Spherodized annealed
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries.,for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
We specialize in offering an inclusive range of Spring Steel Sheet, which meets the variegated requirements of our patrons. These sheets are developed with the help of latest technology and modish equipments in adherence set with industry norms. Material which is used for developing these sheets is of high quality and these sheets find their usage at various industrial sectors. Apart from this, we also offer customization facility of these sheets to our customers.
Features:
Corrosion resistant
Abrasion resistant
Dimensionally accurate
Additional Information:
View Complete details
Minimum Order Quantity: 50 KGS
Thickness | 0-1,1-2,2-3,3-4,4-5,5-6,6-7,7-8,8 |
Material Grade | C-80, C-70, C-60, C-55 |
Material | Spring steel |
Usage/Application | Industrial |
Finishing | CR & HR |
Features | CR ANNELED OR HARDENED TEMPERED |
Outside Diameter | AS REQUIRED |
Temper | AS REQUIRED |
Weight | AS REQUIRED |
Certification | AS REQUIRED |
Density | AS REQUIRED |
Melting Range | AS REQUIRED |
Elongation | AS REQUIRED |
Tensile Strength | AS REQUIRED |
Yield Strength | AS REQUIRED |
Hardness | AS REQUIRED |
We are offering our clients an extensive array of Spring Steel Sheet, which are developed using high grade quality raw materials. These sheets are widely used at various industrial sectors for various purposes. Designed in compliance set with industry norms, offered sheets are developed by trained professionals with the help of cutting-edge technology. Furthermore, we offer these sheets at pocket friendly rates.
Features:
Perfect finishing
High tensile strength
Durability
Additional Information:
View Complete details
Minimum Order Quantity: 20 Kilogram
Thickness | 1 MM TO 10 MM |
Usage/Application | Automobile Industry |
Material Grade | EN-8 |
Brand | BHUSHAN |
Shape | SHEET,COIL |
Color | SILVER |
Finishing | bright |
Features | ANNLED & HARDENED TEMPERED |
Grade | EN-8 AND EN-9 |
Weight | AS REQUIRED |
Surface Finishing | HR & CR |
Hardness | AS REQUIRED |
THICKNESS FROM 0.20 MM TO 10 MM X 4'' X 8''
CHEMICAL COMPOSITION
C-0.55- 0.85
MN 0.60- 1.00
SI- 0.05 -0.35
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kilogram
Thickness | 0.50 mm to 8 mm |
Material Grade | EN-9 / C-55 |
Usage/Application | Manufacturing |
Material | spring steel |
Single Piece Length | >36 meter |
Shape | RECTANGULAR/ COIL |
Finishing | bright |
Elongation | 17-29% |
Tensile Strength | 370-540,580-2670,580-2670 Mpa |
Yield Strength | 370-540,370-540 Mpa |
Length | As per Required |
Additional Information:
View Complete details
Minimum Order Quantity: 15 Kilogram
Application | Automobile Industry |
Shape | Plate, Circular |
Material | CARBON STEEL |
Reduction Ratio | 45 |
Color | SILVER |
Tensile Strength | 615 |
Fracture Elongation | 24 |
Yield Strength | 375 |
EN-42 J SPRING STEELTHICKWIDTHLENGTH1.20 mm38 mmcoilC.R. Shoft1.50 mm360 mm1250 mmC.R. Shoft2 mm360 mm1250 mmC.R. Shoft2.40 mm360 mm2500 mmC.R. Shoft2.50 mm370 mm1250 mmC.R. Shoft2.70 mm400 mm1250 mm H.R.C.R. Shoft3.20 mm330 mm1250 mmC.R. Shoft3.60mm360 mm2500 mm H.R.4 mm1230 mm2500mm H.R.4.10 mm1230 mm2500mm H.R.4.50 mm1050 mm3000 mm H.R.
View Complete details
Minimum Order Quantity: 50 Kg
Type | spring steel |
Thickness | 0.10 mm to 12 mm |
Usage/Application | Industrial |
Shape | Rectangular |
Length | sheet,coil form |
Surface Finishing | HR,CR Finished |
I Deal In | New Only |
Spring Steel Sheet
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Spring Steel Strips Grades : C-45, C-55, C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.
Spring Steel Strips
EuronormGermanyUKUSAEN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S %PC50ECK 50CS50SAE 1050.45-.55.50-.90.05-.35.040 max.045 maxC67SCK67/C67CS70SAE 1070.68- .73.60- .85.15- .25.01 max.02 maxC75SCK75/C75CS70SAE 1074.70- .75.60- .80.15- .30.025 max.025 maxC85SCK85CS80SAE 1085.80- .90.40- .70.15- .35.025 max.025 max
We offer spring steel strip in various shapes and sizes according to your final uses.
Thickness : 1 mm - 8.0mm
Width : 6 mm - 450 mm
Temper : Spherodized annealed
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries.,for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
We have been broadly acclaimed in the domain for offering a faultless range of Spring Steel Sheet to our esteemed clients. The entire range we offer is developed by highly experienced professionals utilizing top-notch quality material which is been sourced at our certified and reliable vendors end. In compliance set with industry norms & standards, offered products are designed using ultra-modern technology.
Features:
Seamless finish
Robust
Higher quality
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | EN- 8 |
Type | CARBON STEEL |
Thickness | 0.50 MM TO 25 MM |
Material | CARBON STEEL |
Usage/Application | ApplicationsEN8 is widely used for many general engineering applications. Typical applications include shafts,studs,bolts,connecting rods,screws,rollers. |
Length | 1250 MM TO 6300 MM |
Color | BLACK,BRIGHT |
Finishing | HR,CR FINISHING |
Tensile Strength | 500-800 N/MM SQ. |
Carbon Contain | 0.35-0.45 |
Manganese | 0.60-1.00 |
Phosphorus | 0.06 MAX |
Silicon | 0.05 MAX |
Sulphur | 0.06 MAX |
EN8 Carbon Steel sheets / plates
EN8 steel stockholders and suppliers, delivering to the whole of the india. EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. It is normally supplied in the cold drawn or as rolled
condition. Tensile properties can vary but are usually between 500-800 N/mm². EN8 is widely used for applications which require better properties than mild steel but does not justify the costs of an alloy steel. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance. EN8 is available from stock in bar and can be cut to your requirements. We also offer flame cut plates cut to your required sizes and normalised. EN8 plates can be supplied surface ground or precision ground.
We welcome export enquiries for carbon steel. Contact our sales office and consult our shipping policy for further
details.
Alternative carbon steel grades we supply
EN9 | EN32 | EN43 | C45
Form of Supply
Ganesh Steel corporation are steel stockholders and suppliers of EN8 carbon steel in round, square and flat bar. EN8
bar can be sawn cut to your required length. West Yorkshire Steel can offer flame cut steel profiles in grade EN8, which can be surface ground if required. EN8 ground steel bar can be supplied, providing a precision ground steel bar to tight tolerances.
Applications
EN8 is widely used for many general engineering applications. Typical applications include shafts, studs, bolts,
connecting rods, screws, rollers.
Analysis
Carbon 0.35-0.45% Phosphorous 0.06% max
Manganese 0.60-1.00% Sulphur 0.06% max
Silicon 0.05-0.35%
Flame Cut Profiles
West Yorkshire Steel are suppliers of EN8 flame cut steel profiles. A hard edge can occur when flame cutting EN8 plate, therefore this grade is commonly normalised after flame cutting. EN8 flame cut profiles can be supplied Lumsden ground or precision ground. Ground Flat Stock
Precision ground flat stock / gauge plate can be produced using EN8 steel. Subject to size suitability and availability of raw material pieces can be produced in approximately 2 to 3 weeks. Standard and non-standard sizes are available.
Forging
Preheat the steel carefully, then raise temperature to 1050°C for forging. Do not forge below 850°C. After forging
cool slowly, preferably in a furnace.
Annealing
Heat slowly to 680-710°C, soak well. Cool slowly in the furnace.
Hardening
Heat the component slowly to 820-860°C and allow it to be heated through. Quench in oil or water. Tempering Temper the EN8 component immediately after quenching whilst tools are still hand warm. Re-heat the EN8 component to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours
minimum) Cool in air. For most applications tempering of EN8 will be between 550-660°C.
Welding
Heat Treatment
Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as
the shape and size of each EN8 steel component. Other considerations during the heat treatment process include
the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment
provider for full guidance on heat treatment of EN8 carbon steel.
Certification
EN8 carbon steel is available with a cast and analysis certificate or a BS EN 10204 3.1 mill certificate, please request when placing any orders. Quality Assured Supply EN8 is supplied in accordance with our ISO 9001:2015 registration.
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kilogram
Usage/Application | Industrial |
Shape | Rectangular |
Material Grade | AISI 1060 |
Brand | Jindal |
Thickness | 0.50 mm to 12 mm |
Size | 1mm to 2 mm to 5 mm above |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | AISI 1075 |
Type | steel plate |
Thickness | 0.50 mm to 12 mm |
Material | STEEL PLATE |
Usage/Application | Industrial |
Shape | Rectangular |
I Deal In | New Only |
Spring Steel Sheet
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Spring Steel Strips Grades : C-45, C-55, C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.
Spring Steel Strips
EuronormGermanyUKUSAEN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S %PC50ECK 50CS50SAE 1050.45-.55.50-.90.05-.35.040 max.045 maxC67SCK67/C67CS70SAE 1070.68- .73.60- .85.15- .25.01 max.02 maxC75SCK75/C75CS70SAE 1074.70- .75.60- .80.15- .30.025 max.025 maxC85SCK85CS80SAE 1085.80- .90.40- .70.15- .35.025 max.025 max
We offer spring steel strip in various shapes and sizes according to your final uses.
Thickness : 1 mm - 8.0mm
Width : 6 mm - 450 mm
Temper : Spherodized annealed
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries.,for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
We have been broadly acclaimed in the domain for offering a faultless range of Spring Steel Sheet to our esteemed clients. The entire range we offer is developed by highly experienced professionals utilizing top-notch quality material which is been sourced at our certified and reliable vendors end. In compliance set with industry norms & standards, offered products are designed using ultra-modern technology.
Features:
Seamless finish
Robust
Higher quality
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | EN-9 carbon steel |
Material | Carbon steel |
Usage/Application | Industrial |
Color | BLACK,BRIGHT |
Shape | Rectangular |
Melting Range | 680-710 ^0 C |
Surface Finishing | HR,CR Finishing |
Length | 1250 MM TO 6300 MM |
EN9 Carbon SteelSheet / plates
EN9 steel stockholders and suppliers, delivering to the whole of the india. EN9 is a medium carbon steelgrade commonly supplied in the as rolled condition. It can be flame or induction hardened to produce a highsurface hardness with excellent wear resistance for a carbon steel grade. EN9 bar is available in full lengths or can be cut to your requirements. EN9 flame cut steel plates can be supplied cut to your required sizes and normalized. Flame cut plates can be supplied Lumsden ground or precision ground.
We welcome export enquiries for carbon steel. Contact our sales office and consult our shipping policy for further details.
Alternative carbon steel grades we supply EN8 | EN32 | EN43| C45
Form of Supply
Ganesh Steel corporation are steel stockholders and suppliers of EN9 carbon steel in round, square, hexagon and flat
bar. Diameters and flat bar can be sawn cut to your exact requirements. West Yorkshire Steel can offer flame cut
profile plates in grade EN9, which can be surface ground if required. Ground steel bar can be supplied, providing a precision ground steel bar to tight tolerances.
Sheet
Plate
Flat
Applications
EN9 is used commonly for many general engineering applications. Typical applications include, shafts, axes,knives, bushes, crankshafts, screws, sickles, wood working drills and hammers.
Analysis
Carbon 0.50-0.60% Phosphorous 0.06% max
Manganese 0.50-0.80% Sulphur 0.06% max
Flame Cut Profiles
West Yorkshire Steel are suppliers of EN9 flame cut steel profiles. A hard edge can occur when flame cutting EN9
plates therefore this grade is commonly normalised after cutting. EN9 flame cut profiles can be supplied Lumsden ground or precision ground.
Ground Flat Stock
Precision ground flat stock / gauge plate can be produced using EN9 steel. Subject to size suitability and
availability of raw material pieces can be produced in approximately 2 to 3 weeks. Standard and non-standard sizes are available.
Forging
Preheat the component carefully, then raise the temperature to 1100°C for forging. Do not forge below 850°C.After forging cool slowly, preferably in a furnace.
Annealing
Heat the steel slowly to 680-710°C, soak well. Cool slowly in the furnace.
Hardening
Heat slowly to 820-840°C and allow it to be heated through. Quench in oil, brine or water.
Tempering
Temper the EN9 steel component immediately after quenching whilst still hand warm. Re-heat to the tempering
temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of EN9 will be between 550-660°C.
Welding
We recommend you contact your welding consumables supplier who should provide you full assistance
Heat Treatment
Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each EN9 steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN9 carbon steel.
Certification
EN9 carbon steel is available with a cast and analysis certificate or a BS EN 10204 3.1 mill certificate, please request when placing any orders. Quality Assured Supply EN9 is supplied in accordance with our ISO 9001:2015 registration.
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kilogram
Size | 1mm to 2mm to 5 mm above |
Material Grade | AISI 1065 |
Type | Steel plate |
Material | steel |
Surface Treatment | Hot Rolled |
Standard | AISI |
Shape | Square |
Tensile Strength | 635 Mpa |
Elongation | 10% |
Brinell Hardness | 187 |
Yield Strength | 490 Mpa |
I Deal In | New and Second Hand |
Aisi 1065 steel plates can be supplied from immediate ready stocks & apart from the aisi 1065 steel plate the company also supplied all other type of product .
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | Other |
Material Grade | steel sheet |
Material | steel sheet |
Brand | India |
Usage/Application | Industrial |
Size | ALL |
Features | C-65 STEEL SHEET |
Certification | ISI |
Stainless Steel | C-65 |
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | C-90 |
Material | SPRING STEEL |
Usage/Application | Industrial |
Finishing | BRIGHT |
Spring Steel Sheet
Spheroidised steel is a heat treated steel which is used to increase the formability and blankability during processing of high strength steel - typically with Carbon content (C %) of 0.45 % and above. This results in steel with Carbon Steel Strip combining ease of fabrication with good strength and surface finish.
Spring Steel Strips Grades : C-45, C-55, C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.
Spring Steel Strips
EuronormGermanyUKUSAEN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S %PC50ECK 50CS50SAE 1050.45-.55.50-.90.05-.35.040 max.045 maxC67SCK67/C67CS70SAE 1070.68- .73.60- .85.15- .25.01 max.02 maxC75SCK75/C75CS70SAE 1074.70- .75.60- .80.15- .30.025 max.025 maxC85SCK85CS80SAE 1085.80- .90.40- .70.15- .35.025 max.025 max
We offer spring steel strip in various shapes and sizes according to your final uses.
Thickness : 1 mm - 8.0mm
Width : 6 mm - 450 mm
Temper : Spherodized annealed
Owing to the support of our experts, we supply a range of medium carbon steel strips that ensures durable finishing, rust resistance, reliability and high quality. Our ranges of these find numerous applications in various industries.,for instance Automobile Seat Belts, Safety Products (Seat Belts, Brake Components) Speciality Chains, Fine Blanked Components, Transmission parts etc.
We have been broadly acclaimed in the domain for offering a faultless range of Spring Steel Sheet to our esteemed clients. The entire range we offer is developed by highly experienced professionals utilizing top-notch quality material which is been sourced at our certified and reliable vendors end. In compliance set with industry norms & standards, offered products are designed using ultra-modern technology.
Features:
Seamless finish
Robust
Higher quality
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Material Grade | c-75 |
Type | Plate |
Shape | Plate and coil |
Color | black, bright |
Usage/Application | Industrial |
Size | 1mm to 2 mm to 5 mm above |
Material | steel sheet |
Brand | Bhushan steel |
Surface Treatment | Hot rolled, cold rolled |
Finishing | HR Finishing,Black,Bright |
Finish | black |
Features | C-75 STEEL SHEET |
Sheet Size | 1250 mm x 2500 mm |
C-75 carbon steel sheet.
View Complete details
Minimum Order Quantity: 50 Kg
Thickness | 0.10 mm to 50 mm |
Usage/Application | Industrial |
Shape | Rectangular |
Material Grade | AISI 1045 |
Carbon steels are a category of steels with 0. 12 to 2% carbon content aisi 1045 is a medium carbon steel designed to be able to function in areas requiring greater strength and hardness.
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Product Brochure
Thickness | 0.50 mm to 12 mm |
Material Grade | EN 47 / 50crv4 |
Material | spring steel |
Shape | sheet,plate,coil |
Usage/Application | construction,Industrial, Automobile |
Size | 1250 X 2500 |
Finishing | CR,HR Finishing |
Grade | EN-47 / 50crv4 |
EN47 spring steel stockholders and suppliers, delivering to the whole of the India. Ganesh Steel are suppliers of EN47 chromium vanadium type spring steel supplied in the as rolled condition. EN47 is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to stress, shock and vibration.
We welcome export enquiries for spring steel. Contact our sales office and consult our shipping policy for further details.
Related Specifications
BS970 735A50 735A51 1.8159 AISI 6150 50CrV4 50CV4 ASTM A829
AnalysisCarbon0.45-0.55%Silicon0.50% maxManganese0.50-0.80%Phosphorous0.06% maxChromium0.80-1.20%Sulphur0.06% maxVanadium0.15% minForm of Supply
Suppliers of round bar we can offer diameters in EN47 sawn to your required lengths as 1 offs or multiple cut pieces. Ground steel bar can be supplied, providing a high quality precision ground spring steel bar to tight tolerances.
DiameterApplications
EN47 is used widely in the motor vehicle industry and many general engineering applications. Suitable for applications that require high tensile strength and toughness. Typical applications include crankshafts, steering knuckles, gears, spindles and pumps.
Forging
Preheat the steel carefully, then raise temperature to 1050°C for forging. Do not forge below 840°C. After forging EN47 spring steel cool slowly, preferably in a furnace.
Annealing
Heat slowly to 820-840°C, soak well. Cool slowly in the furnace.
Hardening
Heat slowly to 650-700°C and thoroughly soak. Continue to heat the steel to the final hardening temperature of 830-860°C and allow the component to be heated through. Quench in oil.
Tempering
Temper the EN47 spring steel component immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of this grade will be between 400-600°C.
Heat Treatment
Heat treatment temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN47.
EN 47 STEEL SHEET 5.00MM THICKNESS FIT 1250 X 2500MM
Additional Information:
View Complete details
Minimum Order Quantity: 50 Kg
Application | Automobile Industry, Automobile Industry |
Material Grade | EN GRADE STEEL SHEET |
Length | 1250 MM TO 2500 MM |
Surface Finishing | HR & CR |
Thickness | 0.5 MM TO 8 MM |
en-42 j spring steel / c-80 steelthickwidthlength0. 38 mm314 mmcoil0. 68 mm255 mmcoil0. 80 mm245 mmsk-85 coil1. 20 mm38 mmcoil1. 30 mm56 mmcoil1. 60 mm270 mm1250 mm2. 10 mm400 mm2000 mm2. 30 mm194 mm2500 mm2. 35 mm147 mm2500 mm2. 50 mm370 mm1250 mm3. 20 mm310 mm2000 mm4 mm1230 mm2500 mm h. R. 4. 25 mm360 mmc. R. Coil4. 50 mm1050 mm3000 mm h. R. 4. 50 mm340 mmcoil4. 50 mm360 mmcoil5 mm1230 mm2500 mm5 mm1230 mm3000 mm
Additional Information:
View Complete details
Minimum Order Quantity: 5 Kg
Usage/Application | Automobile Industry |
Width | 10 mm to 1250 mm |
Material Grade | c-80 / EN-42 J / SAE 1080/ AISI 1080 / CK 80 / S80C |
Shape | Circular,Plate |
Color | Silver |
Surface Finishing | Bright |
Thickness | 0.20 mm to 8 mm |
Finishing | Bright |
C – 80 grade Cold, Rolled & Annealed Steel Strips Composition: C : 0.75 - 0.90% Mn : 0.50 - 0.90% Si : 0.10 – 0.35% S&P : 0.04% Max This grade of Strip is stocked in Annealed condition, 200 HV Max Hardness. However can also be supplied in different temper in range of 200 – 400 HV on request, please check for Minimum economic batch quantity & lead time This is available in ready stock in Thickness range of 4.0 to 0.25 mm in width of 250 - 1000 mm, Can be slitted, Sheared, decoiled as per the customers request. This grade compares well with following grades. AISI 1080/1085 CK 75/80 HC – 14/ EN - 42J/DIN 17200 80 C6 of IS 2507of 1975
Additional Information:
View Complete details